How to improve the oil yield of refining equipment?

Writer： Kaiqian Oil Purifier Release time：2022-03-10 10:26 Clicks：

How to improve the oil yield of refining equipment?

Oil refining equipment is a complex structure. In the oil refining process, there are clear requirements for the materials and indicators of each step, which limits the quantity and quality of each oil refining. So what can be done in the refining process to improve the oil yield of refining equipment.

If we want to improve the oil output rate of oil refining equipment, we should implement every step of production in strict accordance with the requirements, so that all gasoline produced can be purified. In this way, the oil produced can not only be guaranteed in quantity, but also be well applied in quality. At this time, we need to use the oil refining equipment. Select a strong manufacturer of waste oil equipment, the equipment technology is good, and the oil output rate will be improved,

Process of waste oil refining equipment:

After preliminary treatment, the crude oil is removed from impurities and part of the water, pumped into the dehydration kettle and heated. After heating, remove water and a small amount of light components. The material pump body in the kettle is transported to the heater and continues to heat. As the temperature rises, the oil and gas enter the primary distillation tower for gasoline component separation. 

The top of the tower is the gasoline component, which is concentrated and recovered. After the components at the bottom of the tower continue to heat, they enter the atmospheric tower. The top of the tower is light diesel, and the measuring line is diesel components. After cooling respectively, it is sent to the storage tank. After heating, the material at the bottom of the atmospheric tower enters the vacuum tower. The top of the vacuum tower is light component base oil, and the measuring pipeline in the tower is base oil. It can be stored after mixing. The residual oil enters the residual oil tank.